The hot runner injection mold is the most common type of non runner solidification injection mold. The existence of coagulants in the pouring system not only wastes raw materials and increases the energy consumption of the injection machine, but also increases the processing process of runner waste. Using injection molding methods without runner coagulants can reduce the total production cost.

ThermoplasticNon runner solidification injection molding is the use of insulation or heating methods for the pouring system of the mold to ensure that the plastic melt always protects the molten state, thereby avoiding the occurrence of solidification in the pouring system. The non channel solidification injection mold for thermosetting plastics is similar to the molding of thermoplastic plastics, which also prevents the plastic melt in the pouring system from solidifying and maintains a flowable state. A warm runner injection mold is used for the injection of thermosetting plastics without runners.

A hot runner injection mold equipped with a heater to keep the plastic in the pouring system in a molten state. The hot runner is equipped with a runner plate, nozzle, and temperature controller. Due to the high technical difficulty, these hot runner equipment are all produced and operated by professional companies. Deente has extensive experience in hot runner design, especially in areas such as high transparency, high fiber content, and high temperature, with significant breakthroughs. Can assist in the design and manufacturing of injection molds, ensuring the production of injection molding.